Sunray sr4 800se V2 Triple tuner Sim2.20 sr4 v2 Rev.E Enigma 2 Linux OS full hd Satelite receiver ,wholesale cheap discount price.
Home >> sunray satellite receiver >>SUNRAY SR4 V2 800 HD SE HDMI WIFI 1GB Rev.E, 3 TUNER DECODER SIM 2.20 satellite receiver
Sunray sr4 800se V2 Triple tuner Sim2.20 sr4 v2 Rev.E Enigma 2 Linux OS full hd Receiver
Sunray sr4 800se V2 Triple tuner Sim2.20 sr4 v2 Rev.E Enigma 2 Linux OS full hd Receiver
  • Sunray sr4 800se V2 Triple tuner Sim2.20 sr4 v2 Rev.E Enigma 2 Linux OS full hd Receiver
  • Sunray sr4 800se V2 Triple tuner Sim2.20 sr4 v2 Rev.E Enigma 2 Linux OS full hd Receiver
  • Sunray sr4 800se V2 Triple tuner Sim2.20 sr4 v2 Rev.E Enigma 2 Linux OS full hd Receiver
  • Sunray sr4 800se V2 Triple tuner Sim2.20 sr4 v2 Rev.E Enigma 2 Linux OS full hd Receiver

Sunray sr4 800se V2 Triple tuner Sim2.20 sr4 v2 Rev.E Enigma 2 Linux OS full hd Receiver

Special price: [ US$125.00 ]
Sunray sr4 sim 2.2 Card triple tuner DVB-S2/T2/C + WiFi Adapter Sunray 4 hd se satellite tv receiver

1.400mhz processor , Built-in 300Mbps WIFI Function.
2.Enigma 2, Linux Operating System.
3.DVB-S(S2)/C/T2 Triple Tuner.etc 3 tuners ,Flash 1Gb,Ram 512MB,REV.E,Configurato
4.Newest motherboard Rev .E

if you want to know wholesale discount price,please contact us by e-mail.
Sunray sr4 V2 sim 2.2 triple tuner DVB-S2/T2/C + WiFi Adapter Sunray 4 hd se satellite tv receiver Specifications:

Product Description:

1. 400 MHz MIPS Processor (800-HD only has 300MHz.)
2. Colored OLED Display (500-HD do not have)
3. HDMI connector. (Not DVI connector)
4. Plug & Play Slot for an internal2,5" SATA hard diskor eSATA.
5. 10/100 MBit compatible Ethernet Interface.
6. Plug & Play Tuner(Can Change the Tuner into DVB-C, DVB-T.)
7. 3 x USB 2.0(500HD only have one)
8. 2 X Smart Card-Reader (800HD only have one.)
9. sim2.20


400 MHz MIPS Processor
Enigma 2, Linux Operating System
colored OLED - Display
MPEG-2 / H.264 Hardware decoding
Tuner Module, Plug&Play
2 x Smartcard-Reader (Dreamcrypt CA)
Mini USB for Service and software update
10/100Mbit Ethernet Interface
1 x Scart (RGB, FBAS or S-Video)
HDMI
3 x USB 2.0 (e.g keyboard)
analog modem
S/PDIF Interface for digital bit stream out (AC-3)
DVB-S(S2)/C/T2 Triple Tuner.etc 3 tuners ,Flash 1Gb,Ram 512MB,REV. E,Configurato M
SATA
- for internal HDD 2,5��
unlimited channel lists for TV/Radio
channel-change time < 1 second
automatic service scan
directly bouquet-lists
EPG (electronic program guide)
multiple LNB-Switching control (supports DiSEqC)
OSD in many languages and skin-support
Videotext Decoder
extern 12V power supply
Technical Data:
DBS-Tuner mit DVB-S2:
Frequency Range 950 .... 2150 MHz
Demodulation DVB-S (QPSK); DVB-S2 (8PSK,QPSK)
Symbol rate DVB-S: 2 ... 45 Mbaud/s, SCPC/ MCPC
DVB-S2: 10 �C 31 Mbaud/s (8PSK) , 10 �C30 Mbaud/s (QPSK)

Video decoder:

Video Compression MPEG-2 and MPEG-1 compatible, H.264
Video Formats 4:3 / 16:9
Letterbox for 4:3 TV-Device
Audio decoder:
Audiokompression MPEG-1 & MPEG-2 Layer I and II, MP3
Audio Mode Dual (main/sub), Stereo
Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz

Output analog:

Output Level L/R 0,5 Vss on 600 Ohm
THD > 60 dB (1 kHz)
Crosstalk < -65 dB

Output digital:
Output Level 0,5 Vss on 75 Ohm
Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
S/PDIF-Output optical, Toslink

Ausgang Video:

Ausgangspegel FBAS 1 Vss +/- 0.3 dB an 75 Ohm

Video parameter:

Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
Teletext filter in conformity with ETS 300 472 Standard

TV-Scart:

Output: FBAS, RGB, S-Video
Mini USB service connector:
Function: Update of Firmware

Ethernet:

10/100 MBit compatible interface
Function: Update of Firmware
Analoge modem:
analoge modem for Internet connection
SATA Interface:
for internal 2,5" HDD
USB:

3 x USB 2.0
LNB power and polarisation per tuner:
LNB Current 500mA max.; short-circuit-protected
LNB Voltage vertical < 14V no load, > 11,5V at 400mA
LNB Voltage horizontal < 20V no load, > 17,3V at 400mA
Count of active satellite position:

DiSEqC 1.0/1.1/1.2 and USALS (Rotor Control)

Power consumption:

< 15W at 12V
External PSU
Input:

110-240V AC / 50-60Hz / 0,6A